Edison T60D Shoebox light

1.Streamlined modern design

2.Multiple choices for mounting

3.IP66 and 5 years warranty

4.Up to 160 lm/w

Inquire Now

Description Parameter

Product Video

The new Edison fixture (LED Parking Lot lights | Area Lights | Street Lights) is an exceptional mixture of value and performance. The product range has been upgraded to reach very high efficacy up to 160 lm/w and cover lumen packages between 9,000 – 48,000 lumens. The range includes 480V high voltage and various sensor versions, such as photocell and motion sensor for further increasing the energy savings.

Options

1-10V dimmable

Photocell

480V high voltage driver

Certificates

CE, RoHS, UL, DLC

Product Details

Installation Instruction

1:Slip fitter mounting

1.Loose the M12 screw from the slip fitter bracket.
2.Bring in the power line through the front part of the slip fitter bracket, then install the bracket part onto the lamp , and tighten the two M6 screws.
3.Pass the lamp input line through the back part of the slip fitter bracket, and then tighten the M12 screws.
4.Connect to power supply AC 100-277V.
5.Install the hole lamp on the pole and tighten four M8 screws.

2:Arm mounting for square pole

1.Remove the screws from the square mounting arm and move the cover plate.
2.Drill holes in the square pole corresponding to the holes on the mounting arm, at the position you want to install the fixture, then bring in the electric supply line through the middle hole into the mounting arm.
3.Put the bracket reinforcement board in the lamp square pole and fix the bracket on the lamp pole through tightening four M8 screws.
4.Bring in the power line through the hole into the arm and fix the lamp on the mounting arm.
5.Tighten 2 M6 screws and then connect the power supply AC 100-277V.
6.Close the arm cover plate through locking 4 M4 screws.

3:Arm mounting for round pole

1.Remove the screws from the square mounting arm and move the cover plate.
2.Drill holes in the square pole corresponding to the holes on the mounting arm, at the position you want to install the fixture, then bring in the electric supply line through the middle hole into the mounting arm.
3.Put the bracket reinforcement board in the lamp square pole and fix the bracket on the lamp pole through tight four M8 screws.
4.Bring in the power line through the hole into the arm and fix the lamp on the mounting arm.
5.Tighten 2 M6 screws and then connect power supply AC 100V-277V.
6.Close the arm cover plate through locking 4 M4 screws.

4:Trunnion mounting

1. Drill two holes in the wall corresponding to the holes in the mounting bracket, at the position you want to install the fixture.
2. Install expansion screws.
3.Fix the bracket tightly on the installation parts in the wall.
4.Connect the power line and fix lamp on the bracket.
5.Lock two M6 screws tightly and connect the power supply AC 100-277V.

Area of application

Parking lots and streets;Outdoor basketball court and tennis court;Badminton court and football field;The school playground and stadium;Walkways and building grounds;

Roads and streets
Parking lots

Standard lumen (140 lm/W)
Model	Nominal wattages (W)	Input Voltage	Rated luminous (W) (lm/w)	Nominal luminous flux (lumen)	Beam Angle	LED Quantity	CRI
T60D-60W-X-Y	60W	AC100~277V	150±10	9000±900	TYPE 3 TYPE 4 TYPE 5	140pcs EMC3030	>70
T60D-60W-X-YH	60W	AC277~480V	150±10	9000±900		140pcs EMC3030
T60D-100W-X-Y	100W	AC100~277V	140±5	14000±500		140pcs EMC3030
T60D-100W-X-YH	100W	AC200~480V	140±5	14000±500		140pcs EMC3030
T60D-150W-X-Y	150W	AC100~277V	135±5	20000±750		196pcs EMC3030
T60D-150W-X-YH	150W	AC200~480V	135±5	20000±750		196pcs EMC3030
T60D-200W-X-Y	200W	AC100~277V	140±5	28000±1000		196pcs EMC3030
T60D-200W-X-YH	200W	AC200~480V	140±5	28000±1000		196pcs EMC3030
T60D-240W-X-Y	240W	AC100~277V	140±5	33600±1200		392pcs EMC3030
T60D-240W-X-YH	240W	AC200~480V	140±5	33600±1200		392pcs EMC3030
T60D-300W-X-Y	300W	AC100~277V	140±5	42000±1500		392pcs EMC3030
T60D-300W-X-YH	300W	AC200~480V	140±5	42000±1500		392pcs EMC3030

Lumen plus (160 lm/W)
Model	Nominal wattages (W)	Input Voltage	Rated luminous (W) (lm/w)	Nominal luminous flux (lumen)	Beam Angle	LED Quantity	CRI
T60D-150W-X-Y	150W	AC100~277V	165±5	24000±750	TYPE 3 TYPE 4 TYPE 5	280pcs EMC3030	>70
T60D-150W-X-YH	150W	AC200~480V	165±5	24000±750		280pcs EMC3030
T60D-240W-X-Y	240W	AC100~277V	160±5	38400±1200		560pcs EMC3030
T60D-240W-X-YH	240W	AC200~480V	160±5	38400±1200		560pcs EMC3030
T60D-300W-X-Y	300W	AC100~277V	160±5	48000±1500		560pcs EMC3030
T60D-300W-X-YH	300W	AC200~480V	160±5	48000±1500		560pcs EMC3030

Electrical data		Photometrical data
Operating frequency	47-63HZ	Available light colors	warm white;natural white
Type of current	AC100-277V	Available color temperatures	4000K;5000K
Power factor λ	>0.95	Color rendering index Ra	>70
Efficiency in %	>91%	Standard deviation of color matching	< 5
Start time (0.2s / 0.5s / … )	0.1S	UGR (Unified Glare Rating)	<27
Warm-up time to 60 % (1.5s / 2s / … )	0.5S

Standards & Certification		Temperatures & operating conditions
Type of protection	IP66	Heatsink temperature	5~+70℃
Tested dielectric strength	3.75KVac	Ambient temperature	-30~+55℃
Safety features	Open circuit protection; short circuit protection ; overvoltage protection	Storage temperature	-40~+80℃
Certificates	CE, RoHS, UL, DLC
Energy efficiency class	A+ & A++

Lifespan		Features/Capabilities and additional product data
Rated nominal Lifetime	50.000 hours	Base/Socket	Directly wired
Switching cycles	100,000 times	Dimmable	1-10V dimmable
Lumen maintenance at e.o.l.	70%

Packing Information
Model	Dimension(MM)	CTN SIZE(CM)	QTY/CTN	Net Weight/pcs(kg)	Gross Weight/CTN(kg)
T60D-60W	530.526066	44.035.513.5	1PCS	3.8	4.3
T60D-100W	530.526066	44.035.513.5	1PCS	4	4.5
T60D-150W	580.531066	48.540.513.5	1PCS	5.8	6.4
T60D-200W	580.531066	48.540.513.5	1PCS	6.1	6.8
T60D-240W	766.533076	67.542.514.0	1PCS	7.7	8.5
T60D-300W	766.533076	67.542.514.0	1PCS	8.5	9.3

Indoor Lighting

Explosion-proof & Hazardous Location Light

Outdoor Lighting

Special application lighting